Commercial epoxy floor in Southern Utah installed by Nichols Concrete Sealing

Commercial Epoxy Systems — Southern Utah

Commercial
Epoxy Floors
Southern Utah.

Warehouses, auto shops, restaurants, retail, and schools — shot-blast prepped to the profile commercial manufacturers actually specify, installed in phases that keep your doors open, and built to run 15–20 years under real traffic.

Phased Installs — Your Business Stays Open

Southern Utah's Only Shot-Blast Epoxy Applicator

Written Scope & Firm Numbers on Every Project

Get a Free Estimate (435) 752-2900

Commercial Epoxy

Floors that work as hard as you do

A commercial floor isn't a garage floor scaled up. Forklift traffic, hot-tire pickup, chemical spills, daily washdowns, and thermal cycling will find every shortcut in a coating system — usually within the first year. That's why commercial epoxy manufacturers specify shot-blast prep to a CSP 3–4 profile as a condition of their own warranties, and why floors prepped with a grinder or acid etch keep failing across Southern Utah.

We're Southern Utah's only shot-blast epoxy applicator. Every commercial project gets a site assessment, a moisture check, a written scope with phasing built around your hours, and a system matched to your traffic — not a one-size coating rolled over dust. From warehouses in St. George to shops in Hurricane and facilities in Cedar City and Mesquite, we install floors that get coated once and then get out of your way.

What We Coat

Facilities we coat

Warehouses & Industrial

High-build epoxy systems scoped for forklift traffic, pallet drag, and point loads. Line striping and safety zones installed as part of the system, not painted on after.

Auto Shops & Service Bays

Oil, brake fluid, and hot-tire pickup are exactly what commercial epoxy exists for. Chemical-resistant topcoats with grit additive where the floor gets wet.

Restaurants & Kitchens

Seamless, cleanable floors for back-of-house, prep areas, and walk-ins — installed overnight or between service windows so you never miss a cover.

Retail, Schools & Offices

Showrooms, sales floors, classrooms, and common areas that need to look sharp on day one and still look sharp after a decade of foot traffic and floor scrubbers.

Where We Work

Southern Utah, covered

St. George & Washington

Our home base. Warehouses, showrooms, and retail along the Bluff Street, Telegraph, and Washington Parkway corridors — no travel fee, fast scheduling.

Hurricane & La Verkin

Shops, storage facilities, and industrial space in one of the fastest-growing commercial corridors in the county. Same system, same prep, same written scope.

Cedar City

Commercial and institutional floors up I-15 — schools, facilities, and warehouse space. We scope travel and scheduling into the written estimate up front.

Mesquite, NV

Just down the interstate. Commercial installs in Mesquite are scoped the same way as our Utah work — site visit, moisture check, firm written number.

Why Us

The prep the spec sheet actually requires

Pull the technical data sheet on any commercial epoxy system and you'll find the same line: prepare the substrate to CSP 3–4. Shot blasting is how that profile gets produced — thousands of steel shot particles per second stripping contaminants, opening the pores, and profiling the slab in one pass. We're the only applicator in Southern Utah running the equipment. Everyone else grinds or etches and hopes.

On a commercial floor that difference isn't cosmetic — it's the difference between a system that runs 15–20 years under forklifts and one that peels at the loading dock in 18 months. Deeper bond, longer floor, and a written scope that tells you exactly what you're paying for.

Get a Free Estimate Shot Blast vs. Grinding

Common Questions

Commercial Epoxy FAQ

Yes. Most commercial installs are phased — nights, weekends, or section-by-section — so your doors stay open. We build the phasing plan into the written scope before work starts.

It depends on square footage, slab condition, and the system your facility needs — larger floors bring the per-square-foot number down. Every project gets an on-site assessment and a written scope with a firm number, not a ballpark.

Commercial epoxy manufacturers specify a CSP 3–4 surface profile for their warranties. Shot blasting is the method that produces it. Grinding or acid etching leaves a shallower profile that fails early under forklifts, hot tires, and washdowns — we're the only shot-blast applicator in Southern Utah.

Warehouses, auto shops, restaurants and commercial kitchens, retail floors, showrooms, schools, storage facilities, and industrial space across St. George, Washington, Hurricane, Cedar City, and Mesquite. If it's concrete and it works for a living, we coat it.

Get Started

Let's scope your facility.

Free on-site assessments across Southern Utah. We walk the floor, check the slab, and hand you a written scope with a firm number and a phasing plan.